Click to picture to view full size
Shared by Javier Madrigal
>> Download here <<
Link to www.ccna4u.org if you copy from this page
If you want share your exam test, please send to email: quocvuong.it@gmail.com, i will back link to your site or blog or both (If you want!). Very thank
Sorry to VU QUOC (Because i'm too busy, i can't help you....)
Welcome to lagest CCNA Blog:
CCNA4U.ORG
CCNA4U.INFO
CCNA4U.NET
CCNA4U.TK
IP-SUBNET.INFO
9TUT.INFO
www.ccna4u.orgShared by Javier Madrigal
>> Download here <<
Link to www.ccna4u.org if you copy from this page
If you want share your exam test, please send to email: quocvuong.it@gmail.com, i will back link to your site or blog or both (If you want!). Very thank
Sorry to VU QUOC (Because i'm too busy, i can't help you....)
Welcome to lagest CCNA Blog:
CCNA4U.ORG
CCNA4U.INFO
CCNA4U.NET
CCNA4U.TK
IP-SUBNET.INFO
9TUT.INFO
www.ccna4u.org
5 comment:
Hello quocvuong
You help me very much, i have sent to you CCNA4 FINAL (Lastest).
is their an english version of the exam
Hi
Do you have a english v of this pls pls pls, my test is today.
hello, do you have ccna 2 final v4.1? thanks matsos86@hotmail.com
Here is new question please answer
?3
Refer to the exhibit. All interfaces are configured with the correct IP addresses and subnet masks. OSPF has been configured as the routing protocol. During troubleshooting, it is determined that hosts on network B can ping the Lo0 interface on R1 but are unable to reach hosts on network A. What is the cause of the problem?
Routers R1 and R2 have incorrect router IDs configured.
Router R1 is unable to form a neighbor relationship with router R2.
Routers R1 and R2 have been configured in different OSPF areas.
The configuration of router R1 fails to include network A in the OSPF routing process.
5
Top of Form
Which network design feature requires the deployment of a classless routing protocol?
private IP addressing
advertising default routes
variable length subnet masks
summarization on major network boundaries
Bottom of Form
6
Top of Form
What two routing protocols use a hierarchal network topology? (Choose two.)
IS-IS
EIGRP
OSPF
RIPv1
RIPv2
Bottom of Form
7
Refer to the exhibit. The interface addresses and OSPF priorities are configured as shown. Because of the boot order of the routers, router A is currently the DR and router B is the BDR. If router A fails and is replaced the next day by a new router, router D, what OSPF protocol action or actions will happen?
Router D will be elected DR, and router C will become the BDR.
Router D will be elected DR, and router B will remain the BDR.
Router C will become the DR, and router B will become the BDR.
Router B will remain the BDR, and OSPF will function on the segment via the use of only the BDR.
21
Which router component is used to store the routing table?
Flash
NVRAM
ROM
SDRAM
24
Refer to the exhibit. Which two statements are true based on the exhibited output? (Choose two.)
Automatic summarization is disabled.
The EIGRP routing protocol is being used.
There is one feasible successor in the routing table.
The serial interface S0/0/0 is administratively down.
The router is originating the route to 172.16.1.0/24 via the S0/0/0 interface.
27
Refer to the exhibit. The users on the local network 172.16.1.0/24 complain that they are unable to connect to the Internet. What step should be taken to remedy the problem?
A new static route must be configured on R1 with the R3 serial interface as the next hop.
A new default route must be configured on R1 with the R3 serial interface as the next hop.
The default route on R2 should be configured with the R3 serial interface as the next hop.
The default route on R2 must be replaced with a new static route and the next hop should be the R1 FastEthernet interface.
28
A network is configured with the IP, IPX, and AppleTalk protocols. Which routing protocol is recommended for this network?
RIPv1
RIPv2
EIGRP
OSPF
38
A network administrator needs to assign the very last usable IP address in the 172.24.64.0/18 network range to the router interface that serves this LAN. Which IP address should the administrator configure on the interface?
172.16.128.154/18
172.16.255.254/18
172.24.64.254/18
172.24.127.254/18
43
Refer to the exhibit. Router R1 is configured as shown in the exhibit. PC1 on 172.16.1.0/24 network can reach the default gateway on R1. The rest of the routers are configured with the correct IP addresses on the interfaces. Routers R2 and R3 do not have static or dynamic routing enabled. How far will PC1 be able to successfully ping?
router R1 Fa0/0 interface
router R1 S0/0/0 interface
router R2 S0/0/0 interface
router R2 Fa0/0 and S0/0/1 interfaces
router R3 Fa0/0 and S0/0/0 interfaces
Post a Comment
1. Please don't use offensive language.
Such comments will be deleted immediately.
2. Please don't comment anonymously.
Use a nick name or blogger ID in your comment.
Happy Commenting !