Cisco Exploration CCNA 4.0-CCNA 640-802 Blog. Questions & Answers

CCNA 4 v5 Practice Skills Assessment – Packet Tracer

CCNA 3 Exam 2014

CCNA Routing and Switching
Connecting Networks

Practice Skills Assessment – Packet Tracer

A few things to keep in mind while completing this activity:

Do not use the browser Back button or close or reload any exam windows during the exam.

Do not close Packet Tracer when you are done. It will close automatically.

Click the Submit Assessment button in the browser window to submit your work.

Introduction

ccna 4 v5 Final Exam 2014

ccna 4 v5 Final Exam 2014

CCNA 3 Exam 2014

1 Why is it useful categorize networks by size when discussing network design?

Knowing the number of connected devices will define how many additional layers will be added to the three-tier hierarchical network design.

Knowing the number of connected devices will define how many multilayer switches will be necessary at the core layer.

A high-level redundancy at the access layer may be better implemented if the number of connected devices is know.

The complexity of networking infrastructure will vary according to the number of connected devices.*

CCNA 4 v5.0 Practice Final Exam

CCNA 4 v5.0 Practice Final Exam

CCNA 3 Exam 2014

1
Which is a clientless VPN solution for mobile workers?

GRE
SSL*
SSH
IPsec

CCNA 4 Chapter 9 v5.0 2014 Exam Answers

CCNA 4 Chapter 9 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1. Users are reporting longer delays in authentication and in accessing network resources during certain time periods of the week. What kind of information should network engineers check to find out if this situation is part of a normal network behavior?

syslog records and messages
the network performance baseline
debug output and packet captures
network configuration files

CCNA 4 Chapter 8 v5.0 2014 Exam Answers

CCNA 4 Chapter 8 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1.

Refer to the exhibit. Which two conclusions can be drawn from the syslog message that was generated by the router? (Choose two.)

This message resulted from an unusual error requiring reconfiguration of the interface.
This message indicates that the interface should be replaced.
This message is a level 5 notification message.
This message indicates that service timestamps have been configured.
This message indicates that the interface changed state five times.

CCNA 4 Chapter 7 v5.0 2014 Exam Answers

CCNA 4 Chapter 7 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1. How is “tunneling” accomplished in a VPN?

New headers from one or more VPN protocols encapsulate the original packets.
All packets between two hosts are assigned to a single physical medium to ensure that the packets are kept private.
Packets are disguised to look like other types of traffic so that they will be ignored by potential attackers.
A dedicated circuit is established between the source and destination devices for the duration of the connection.

CCNA 4 Chapter 6 v5.0 2014 Exam Answers

CCNA 4 Chapter 6 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1. What are two Layer 2 WAN technologies that can provide secure remote connections between corporate branch offices? (Choose two.)

LTE
Frame Relay
leased lines
QoS
IPsec

CCNA 4 Chapter 5 v5.0 2014 Exam Answers

CCNA 4 Chapter 5 v5.0 2014 Exam Answers
CCNA 3 Exam 2014

1 Typically, which network device would be used to perform NAT for a corporate environment?

DHCP server
host device
router
server
switch

CCNA 4 Chapter 4 v5.0 2014 Exam Answers

CCNA 4 Chapter 4 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1.
What is a characteristic of Frame Relay that provides more flexibility than a dedicated line?

Customers use dedicated circuits in increments of 64 kb/s.
Dedicated physical circuits are installed between each site.
The Frame Relay cloud allocates as much bandwidth as required to active PVCs to maintain the connection.
One router WAN port can be used to connect to multiple destinations.

CCNA 4 Chapter 3 v5.0 2014 Exam Answers

CCNA 4 Chapter 3 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1.
Which address is used in the Address field of a PPP frame?

a single byte of binary 10101010
a single byte of binary 11111111*
the IP address of the serial interface
a single byte of binary 00000000

CCNA 4 Chapter 2 v5.0 2014 Exam Answers

CCNA 4 Chapter 2 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1.

Which WAN technology is cell-based and well suited to carry voice and video traffic?

VSAT
ISDN
Frame Relay
ATM*

CCNA 4 Chapter 1 v5.0 2014 Exam Answers

CCNA 4 Chapter 1 v5.0 2014 Exam Answers
CCNA 3 Exam 2014

1
What are two structured engineering principles necessary for successful implementation of a network design? (Choose two.)

modularity*
security
availability
quality of service
resiliency*

CCNA 3 v5.0 Final Switched Networks Practice Skills Assessment

CCNA 3 Exam 2014

CCNA Routing and Switching
Switched Networks

Practice Skills Assessment – Packet Tracer

A few things to keep in mind while completing this activity:

Do not use the browser Back button or close or reload any exam windows during the exam.
Do not close Packet Tracer when you are done. It will close automatically.
Click the Submit Assessment button in the browser window to submit your work.

CCNA 4 v5.0 Final OSPF Practice Skills Assessment

CCNA 4 v5.0 Practice Skills Assessment 2

CCNA 3 Exam 2014

CCNA Routing and Switching
Scaling Networks

OSPF Practice Skills Assessment – Packet Tracer

A few things to keep in mind while completing this activity:

Do not use the browser Back button or close or reload any exam windows during the exam.

Do not close Packet Tracer when you are done. It will close automatically.

Click the Submit Assessment button in the browser window to submit your work.

Introduction

CCNA 4 v5.0 Final EIGRP Practice Skills Assessment

CCNA 3 Exam 2014

CCNA 3 Routing and Switching
Scaling Networks

EIGRP Practice Skills Assessment – Packet Tracer

A few things to keep in mind while completing this activity:

Do not use the browser Back button or close or reload any exam windows during the exam.

Do not close Packet Tracer when you are done. It will close automatically.

Click the Submit Assessment button in the browser window to submit your work.

CCNA 3 v5.0 Final Exam 2014

CCNA 3 v5.0 Final Exam 2014

CCNA 3 Exam 2014

1

Refer to the exhibit. A network administrator is attempting to upgrade the IOS system image on a Cisco 2901 router. After the new image has been downloaded and copied to the TFTP server, what command should be issued on the router before the IOS system image is upgraded on the router?

READ MORE » CCNA 3 v5.0 Final Exam 2014

CCNA 3 v5.0 Practice Final Exam 2014

CCNA 3 v5.0 Practice Final Exam 2014

CCNA 3 Exam 2014

Scaling Networks (Version 5.0)

CCNA 4 v5.0 Pretest Exam 2014

CCNA 3 Exam 2014

Scaling Networks (Version 5.0) – ScaN Pretest Exam

1
What is a disadvantage of NAT?
There is no end-to-end addressing. *
The router does not need to alter the checksum of the IPv4 packets.
The internal hosts have to use a single public IPv4 address for external communication.
The costs of readdressing hosts can be significant for a publicly addressed network.

CCNA 3 Chapter 9 v5.0 2014 Exam Answers

CCNA 3 Chapter 9 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1
Beginning with the Cisco IOS Software Release 15.0, which license is a prerequisite for installing additional technology pack licenses?

UC

IPBase*

SEC

DATA

CCNA 3 Chapter 8 v5.0 2014 Exam Answers

CCNA 3 Chapter 8 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1
Which command can be issued on a router to verify that automatic summarization is enabled?

show ip eigrp neighbors

show ip protocols*

show ip interface brief

show ip eigrp interfaces

CCNA 3 Chapter 7 v5.0 2014 Exam Answers

CCNA 3 Chapter 7 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1

Place the options in the following order:
first
– not scored –
third
second

CCNA 3 Chapter 6 v5.0 2014 Exam Answers

CCNA 3 Chapter 6 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1
The network administrator has been asked to summarize the routes for a new OSPF area. The networks to be summarized are 172.16.8.0, 172.16.10.0, and 172.16.12.0 with subnet masks of 255.255.255.0 for each network. Which command should the administrator use to forward the summary route for area 15 into area 0?

area 15 range 172.16.8.0 255.255.255.248

area 0 range 172.16.8.0 255.255.248.0

area 0 range 172.16.8.0 255.255.255.248

area 15 range 172.16.8.0 255.255.248.0*

CCNA 3 Chapter 5 v5.0 2014 Exam Answers

CCNA 3 Chapter 5 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1
A network administrator has just changed the router ID on a router that is working in an OSPFv2 environment. What should the administrator do to reset the adjacencies and use the new router ID?

Issue the clear ip ospf process privileged mode command.*

Configure the network statements.

Change the OSPFv2 process ID.

Change the interface priority.

CCNA 3 Chapter 4 v5.0 2014 Exam Answers

CCNA 3 Chapter 4 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1

Launch PT Hide and Save PT
Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.
What is the SSID of the connected network and which message is displayed in the browser window?

CCNA 3 Chapter 3 v5.0 2014 Exam Answers

CCNA 3 Chapter 3 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1
When a range of ports is being configured for EtherChannel, which mode will configure LACP so that it initiates the EtherChannel negotiation?

desirable

auto

active*

passive

CCNA 3 Chapter 2 v5.0 2014 Exam Answers

CCNA 3 Chapter 2 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1
Which protocol provides up to 16 instances of RSTP, combines many VLANs with the same physical and logical topology into a common RSTP instance, and provides support for PortFast, BPDU guard, BPDU filter, root guard, and loop guard?

STP

Rapid PVST+

PVST+

MST*

CCNA 3 Chapter 1 v5.0 2014 Exam Answers

CCNA 3 Chapter 1 v5.0 2014 Exam Answers

CCNA 3 Exam 2014

1
What are two benefits of extending access layer connectivity to users through a wireless medium? (Choose two.)

increased network management options

reduced costs*

increased flexibility*

increased bandwidth availability

decreased number of critical points of failure

CCNA 2 Skill Assessment (PT) - Routing and Switching – Routing Protocols

CCNA 2 Skill Assessment (PT) - Routing and Switching – Routing Protocols

CCNA 2 Exam 2014

CCNA Routing and Switching
Routing Protocols

Routing Protocols OSPF Practice Skills Assessment – Packet Tracer

A few things to keep in mind while completing this activity:
1. Do not use the browser Back button or close or reload any exam windows during the exam.
2. Do not close Packet Tracer when you are done. It will close automatically.
3. Click the Submit Assessment button in the browser window to submit your work.
Introduction

CCNA 2 RSE Practice Skills Assessment – PT

CCNA 2 RSE Practice Skills Assessment – PT

CCNA 2 Exam 2014

CCNA Routing and Switching
Routing and Switching Essentials

Practice Skills Assessment – Packet Tracer

A few things to keep in mind while completing this activity:

Do not use the browser Back button or close or reload any exam windows during the exam.

Do not close Packet Tracer when you are done. It will close automatically.

Click the Submit Assessment button in the browser window to submit your work.

Introduction

CCNA 2 v5 Final Exam 2014

CCNA 2 Exam 2014

1.
What are two features of a link-state routing protocol? (Choose two.)
The database information for each router is obtained from the same source.
Routers send triggered updates in response to a change.
Routers create a topology of the network by using information from other routers.
Paths are chosen based on the lowest number of hops to the designated router.
Routers send periodic updates only to neighboring routers.

CCNA 2 v5 Practice Final Exam 2013

CCNA 2 R&S Essentials Practice Final v5.0 2014 exam answers
CCNA 2 Exam 2014

1
Which command would be best to use on an unused switch port if a company adheres to the best practices as recommended by Cisco?

switchport port-security mac-address sticky
ip dhcp snooping
switchport port-security mac-address sticky mac-address
switchport port-security violation shutdown
shutdown*

CCNA 2 Chapter 11 2014 v5.0 Exam Answers

CCNA 2 Chapter 11 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1
Which version of NAT allows many hosts inside a private network to simultaneously use a single inside global address for connecting to the Internet?

dynamic NAT
port forwarding
PAT*
static NAT

CCNA 2 Chapter 10 2014 v5.0 Exam Answers

CCNA 2 Chapter 10 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1

Refer to the exhibit. What should be done to allow PC-A to receive an IPv6 address from the DHCPv6 server?

CCNA 2 Chapter 9 2014 v5.0 Exam Answers

CCNA 2 Chapter 9 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1
A network administrator needs to configure a standard ACL so that only the workstation of the administrator with the IP address 192.168.15.23 can access the virtual terminal of the main router. Which two configuration commands can achieve the task? (Choose two.)

Router1(config)# access-list 10 permit 192.168.15.23 255.255.255.0
Router1(config)# access-list 10 permit 192.168.15.23 0.0.0.0*
Router1(config)# access-list 10 permit 192.168.15.23 0.0.0.255
Router1(config)# access-list 10 permit 192.168.15.23 255.255.255.255
Router1(config)# access-list 10 permit host 192.168.15.23*

CCNA 2 Chapter 8 2014 v5.0 Exam Answers

CCNA 2 Chapter 8 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1
Which OSPF component is identical in all routers in an OSPF area after convergence?

routing table
link-state database*
SPF tree
adjacency database

CCNA 2 Chapter 7 2014 v5.0 Exam Answers

CCNA 2 Chapter 7 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1
What is the purpose of the passive-interface command?

allows interfaces to share IP addresses
allows an interface to remain up without receiving keepalives
allows a router to send routing updates on an interface but not receive updates via that innterface
allows a routing protocol to forward updates out an interface that is missing its IP address
allows a router to receive routing updates on an interface but not send updates via that interface*

CCNA 2 Chapter 6 2014 v5.0 Exam Answers

CCNA 2 Chapter 6 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1
What are two advantages of static routing over dynamic routing? (Choose two.)

Static routing is more secure because it does not advertise over the network.*
Static routing is relatively easy to configure for large networks.
Static routing requires very little knowledge of the network for correct implementation.
Static routing uses fewer router resources than dynamic routing.*
Static routing scales well with expanding networks.

CCNA 2 Chapter 5 2014 v5.0 Exam Answers

CCNA 2 Chapter 5 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1
Fill in the blank. Do not use abbreviations.
A network engineer is troubleshooting the configuration of new VLANs on a network. Which command is used to display the list of VLANs that exists on the switch? ” show vlan ”

2
What is a disadvantage of using multilayer switches for inter-VLAN routing?

CCNA 2 Chapter 4 2014 v5.0 Exam Answers

CCNA 2 Chapter 4 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1
What type of IPv6 address is required as a minimum on IPv6 enabled interfaces?

static
global unicast
link-local*
loopback
unique local

CCNA 2 Chapter 3 2014 v5.0 Exam Answers

CCNA 2 Chapter 3 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1
A network administrator is determining the best placement of VLAN trunk links. Which two types of point-to-point connections utilize VLAN trunking? (Choose two.)

between two switches that share a common VLAN
between a switch and a server that has an 802.1Q NIC*
between a switch and a client PC
between a switch and a network printer
between two switches that utilize multiple VLANs*

CCNA 2 Chapter 2 2014 v5.0 Exam Answers

CCNA 2 Chapter 2 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1
Which type of cable does a network administrator need to connect a PC to a switch to recover it after the Cisco IOS software fails to load?

a coaxial cable

a crossover cable

a straight-through cable

a console cable*

CCNA 2 Chapter 1 2014 v5.0 Exam Answers

CCNA 2 Chapter 1 2014 v5.0 Exam Answers

CCNA 2 Exam 2014

1
What is one advantage of using the cut-through switching method instead of the store-and-forward switching method?

has a positive impact on bandwidth by dropping most of the invalid frames

makes a fast forwarding decision based on the source MAC address of the frame

has a lower latency appropriate for high-performance computing applications*

provides the flexibility to support any mix of Ethernet speeds

CCNA 4 Exam 2014

CCNA 4 Exam 2014
CCNA 4 Routing and Switching: Connecting Networks (v.5.0) Exams 2014

Connecting Networks : Discusses the WAN technologies and network services required by converged applications in a complex network. The course enables students to understand the selection criteria of network devices and WAN technologies to meet network requirements. Students learn how to configure and troubleshoot network devices and resolve common issues with data link protocols. Students also develop the knowledge and skills needed to implement IPSec and virtual private network (VPN) operations in a complex network

CCNA 3 Exam 2014

CCNA 3 Routing and Switching: Scaling Networks (v.5.0) Exams 2014

Scaling Networks : Describes the architecture, components, and operations of routers and switches in a large and complex network. Students learn how to configure routers and switches for advanced functionality. By the end of this course, students will be able to configure and troubleshoot routers and switches and resolve common issues with OSPF, EIGRP, STP, and VTP in both IPv4 and IPv6 networks. Students will also develop the knowledge and skills needed to implement DHCP and DNS operations in a network.

CCNA 2 Exam 2014

CCNA 2 Routing and Switching: Routing and Switching Essentials (v.5.0) Exams 2014

Routing and Switching Essentials : Describes the architecture, components, and operations of routers and switches in a smallnetwork. Students learn how to configure a router and a switch for basic functionality. By the end of this course, students will be able toconfigure and troubleshoot routers and switches and resolve common issues with RIPv1, RIPv2, single-area and multi-area OSPF, virtual LANs, and inter-VLAN routing in both IPv4 and IPv6 networks.

CCNA 1 v5.0 Final - Routing and Switching: Introduction to Networks

CCNA 1 v5.0 Final - Routing and Switching: Introduction to Networks

CCNA 1 Exam 2014

1 Refer to the exhibit.

The network administrator enters these commands into the R1 router:

CCNA 1 Final PT Practice Skills Exam

CCNA 1 Final v5.0 Introduction to Networks Practice Final – CLI command answers

CCNA 1 Exam 2014

CCNA1 v5.0 Introduction to Networks Final – CLI command answers

You will practice and be assessed on the following skills:

Configuration of initial IOS device settings

Design and calculation of IPv4 addressing

Configuration of IOS device interfaces including IPv4 and IPv6 addressing when appropriate

Addressing of network hosts with IPv4 and IPv6 addresses

Enhancing device security, including configuration of the secure transport protocol for remote device configuration

Configuration of a switch management interface

CCNA 1 v5.0 ITN Practice Final Exam Answers

CCNA 1 Exam 2014

Introduction to Networks

ITN Practice Final – Introduction to Networks (Version 5.0)

1
A network administrator is designing a new network infrastructure that includes both wired and wireless connectivity. Under which situation would a wireless connection be recommended?

CCNA 1 v5.0 Pretest Exam Answers 2014

CCNA 1 Exam 2014

1

2
The failure rate in a certain brand of network interface card has been determined to be 15%. How many cards could be expected to fail in a company that has 80 of the cards installed?

CCNA 1 Chapter 11 v5.0 2014 Exam Answers

CCNA 1 Chapter 11 v5.0 2014 Exam Answers

CCNA 1 Exam 2014

1 Which two statements about a service set identifier (SSID) are true? (Choose two.)

responsible for determining the signal strength

used to encrypt data sent across the wireless network

all wireless devices on the same WLAN must have the same SSID

consists of a 32-character string and is not case sensitive

tells a wireless device to which WLAN it belongs

CCNA 1 Chapter 10 v5.0 2014 Exam Answers

CCNA 1 Chapter 10 v5.0 2014 Exam Answers

CCNA 1 Exam 2014

1
Which three layers of the OSI model provide similar network services to those provided by the application layer of the TCP/IP model? (Choose three.)

physical layer
session layer*
transport layer
application layer*
presentation layer*
data link layer

CCNA 1 Chapter 9 v5.0 2014 Exam Answers

CCNA 1 Chapter 9 v5.0 2014 Exam Answers

CCNA 1 Exam 2014

1
Refer to the exhibit.

How many broadcast domains are there?

1
2
3
4*

CCNA 1 Chapter 8 v5.0 2014 Exam Answers

CCNA 1 Chapter 8 v5.0 2014 Exam Answers

1
Fill in the blank.
The decimal equivalent of the binary number 10010101 is “149” .

CCNA 1 Chapter 7 v5.0 2014 Exam Answers

CCNA 1 Chapter 7 v5.0 2014 Exam Answers

1
A PC is downloading a large file from a server. The TCP window is 1000 bytes. The server is sending the file using 100-byte segments. How many segments will the server send before it requires an acknowledgment from the PC?
1 segment
10 segments*
100 segments
1000 segments

CCNA 1 Chapter 6 v5.0 2014 Exam Answers

CCNA 1 Chapter 6 v5.0 2014 Exam Answers

1
After troubleshooting a router, the network administrator wants to save the router configuration so that it will be used automatically the next time that the router reboots. What command should be issued?
copy startup-config flash
copy running-config flash
reload
copy startup-config running-config
copy running-config startup-config*

CCNA 1 Chapter 5 v5.0 2014 Exam Answers

CCNA 1 Chapter 5 v5.0 2014 Exam Answers

1

2
A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in its ARP cache. How will the device obtain a destination MAC address?

CCNA 1 Chapter 4 v5.0 2014 Exam Answers

CCNA 1 Chapter 4 v5.0 2014 Exam Answers

1
What are two reasons for physical layer protocols to use frame encoding techniques? (Choose two.)

to identify where the frame starts and ends*

to distinguish data bits from control bits*

to reduce the number of collisions on the media

to increase the media throughput

to provide better media error correction

CCNA 1 Chapter 3 v5.0 2014 Exam Answers

CCNA 1 Chapter 3 v5.0 2014 Exam Answers

1.
Which PDU format is used when bits are received from the network medium by the NIC of a host?
packet
segment
frame
file

CCNA 1 Chapter 2 v5.0 2014 Exam Answers

CCNA 1 Chapter 2 v5.0 2014 Exam Answers

1.

Refer to the exhibit. A switch was configured as shown. A ping to the default gateway was issued, but the ping was not successful. Other switches in the same network can ping this gateway. What is a possible reason for this?

CCNA 1 Chapter 11 Test Online

CCNA 1 Chapter 10 Test Online

CCNA 1 Chapter 10 Test Online
[WpProQuiz 10]

CCNA 1 Chapter 9 Test Online

CCNA 1 Chapter 9 Test Online
[WpProQuiz 9]

CCNA 1 Chapter 8 Test Online

CCNA 1 Chapter 8 Test Online
[WpProQuiz 8]

CCNA 1 Chapter 7 Test Online

CCNA 1 Chapter 7 Test Online
[WpProQuiz 7]

CCNA 1 Chapter 6 Test Online

CCNA 1 Chapter 6 Test Online
[WpProQuiz 6]

CCNA 1 Chapter 5 Test Online

CCNA 1 Chapter 5 Test Online
[WpProQuiz 5]

CCNA 1 Chapter 4 Test Online

CCNA 1 Chapter 4 Test Online
[WpProQuiz 4]

CCNA 1 Chapter 3 Test Online

CCNA 1 Chapter 3 Test Online
[WpProQuiz 3]

CCNA 1 Chapter 2 Test Online

CCNA 1 Chapter 2 Test Online
[WpProQuiz 2]

CCNA 1 Chapter 1 Test Online

CCNA 1 Chapter 1 Test Online
[WpProQuiz 1]

CCNA 1 Exam 2014

CCNA 1 Routing and Switching: Introduction to Networks (v.5.0) Exams 2014

Introduction to Networks : Introduces the architecture, structure, functions, components, and models of the Internet and computer networks. The principles of IP addressing and fundamentals of Ethernet concepts, media, and operations are introduced to provide a foundation for the curriculum. By the end of the course, students will be able to build simple LANs, perform basic configurations for routers and switches, and implement IP addressing schemes.

CCNA 1 Chapter 1 v5.0 2014 Exam Answers

1. Which two Internet solutions provide an always-on, high-bandwidth connection to computers on a LAN? (Choose two.)

cellular
DSL
satellite
cable
dial-up telephone

CCNA 1 Final Exam 2014 Test Online

[WpProQuiz 12]

IT Essentials v5 answers (ITE 2013-2014)

First 12 chapters contain both version.

IT Essentials v5.0 Chapter 1 Exam Answers

IT Essentials v5.0 Chapter 11 Exam Answers

IT Essentials v5.0 Chapter 12 Exam Answers

IT Essentials v5.0 Chapter 2 Exam Answers

IT Essentials v5.0 Chapter 3 Exam Answers

IT Essentials v5.0 Chapter 4 Exam Answers

IT Essentials v5.0 Chapter 5 Exam Answers

IT Essentials v5.0 Chapter 6 Exam Answers

IT Essentials v5.0 Chapter 7 Exam Answers

IT Essentials v5.0 Chapter 8 Exam Answers

IT Essentials v5.0 Chapter 9 Exam Answers

IT Essentials v5.0 Chapters 1-6 Checkpoint Exam Answers

It-essentials v5.0 A+ Cert Practice Exam 1

It-essentials v5.0 A+ Cert Practice Exam 2

It-essentials v5.0 Final Exam Answers 2014

It-essentials v5.0 Practice Final Exam Answers

IT Essentials v5.0 Chapter 1 Exam Answers

IT Essentials v5.0 Chapter 1 Exam Answers

1
Which type of memory is primarily used as cache memory?

DRAM

RAM

ROM

SRAM*

IT Essentials v5.0 Chapter 2 Exam Answers

1
Which tool in Windows XP gives a technician access to initialize disks and create partitions?

Defrag

Scandisk

Format

Disk Management*

Disk Cleanup

IT Essentials v5.0 Chapter 3 Exam Answers

1
A technician is troubleshooting a PC that will not boot. When the PC is powered on, it emits a series of beeps and indicates that the BIOS settings have changed and need to be reconfigured. The technician reconfigures the BIOS settings, saves them, and the computer boots. Later when the PC is powered off and back on again, the same error message appears, and all the BIOS changes are gone. What should the technician do to fix the problem?

Reseat the RAM.
Replace the motherboard.
Upgrade the BIOS firmware.
Replace the CMOS battery.*

IT Essentials v5.0 Chapter 4 Exam Answers

1
Which task should be part of a software maintenance routine?

Check for and secure any loose cables.
Remove dust from the power supply.
Defragment the hard drive.*
Back up the data, reformat the hard drive, and reinstall the data.

IT Essentials v5.0 Chapter 5 Exam Answers

1
What are two features of the active partition of a hard drive? (Choose two.)

The active partition must be a primary partition.*
Up to four primary partitions can be marked as active.
The operating system uses the active partition to boot the system.*
The active partition may include the manufacturer recovery partition.
An active partition must be assigned C: as the drive letter.

IT Essentials v5.0 Chapter 6 Exam Answers

Which network device makes forwarding decisions based on the destination MAC address that is contained in the frame?

repeater
hub
switch*
router

IT Essentials v5.0 Chapters 1-6 Checkpoint Exam Answers

1. Which wireless security procedure should be used to hide the WLAN ID from wireless clients?

Configure WEP only on the access point.
Disable the broadcast of the SSID on the access point.*
Decrease the antenna spectrum on each wireless client.
Configure MAC address filtering on the access point.
Install WAP on the wireless clients.

IT Essentials v5.0 Chapter 8 Exam Answers

1
What is a good source for safely downloading Android apps?

the Apple App Store
iTunes
freeware sites
Google Play*

IT Essentials v5.0 Chapter 7 Exam Answers

1
Which two statements are true of a laptop CPU when compared to a desktop CPU? (Choose two.)

The laptops consume more power.
The laptop CPUs are interchangeable with desktop CPUs.
The laptops are designed to produce less heat.*
The laptops operate at higher clock speeds.
The laptops use smaller cooling devices.*

IT Essentials v5.0 Chapter 9 Exam Answers

Which factor affects the speed of an inkjet printer?

the desired quality of the image*
the cost of the inkjet cartridges
the size of printer power supply
the quality of the paper

IT Essentials v5.0 Chapter 11 Exam Answers

Which two actions should a technician take if illegal content, such as child pornography, is discovered on the hard drive of a customer computer? (Choose two.)

Contact a first responder.*
Confront the customer immediately.
Shut down the computer until authorities arrive.
Document as much information as possible.*
Remove and destroy the hard drive.

IT Essentials v5.0 Chapter 12 Exam Answers

Which two operating systems can be upgraded to Windows XP Home? (Choose two.)

Windows 95
Windows 3.1
Windows 98*
Windows 98 SE
Windows NT workstation*

It-essentials v5.0 Practice Final Exam Answers

1
Which two elements should typically be included in a computer security policy? (Choose two.)

technical details of the biometric systems used
a list of acceptable user passwords
an acceptable computer usage statement for the organization
details of the data file access procedures
requirements necessary for data to remain confidential on a network

It-essentials v5.0 A+ Cert Practice Exam 1

1
This is a flash item. Please click below to answer this item.

2
Which three PC desktop functions are typically provided on the front panel and must be connected to the motherboard? (Choose three.)
PC power button
CPU temperature indicator
audio power button
network activity light
drive activity light
USB connectors

It-essentials v5.0 A+ Cert Practice Exam 2

Refer to the exhibit. In what situation would a technician use this tab?

When the device will not be using the Internet.
When a device is behind a firewall and software is being used that needs access to a remote network.
When the computer will be using a VPN connection and accessing the Internet while connected through the VPN.
When a laptop is used both at work with DHCP and at home with a static IP address.

It-essentials v5.0 Final Exam Answers 2014

1
Which power criterion will affect the number of internal drives that are installed in a computer?

+5VDC output
+20VDC output
AC input
DC output
power supply voltage
power supply wattage

2
A customer needs additional storage space on an older computer. What will the technician look at in the computer to determine if an additional hard drive can be added?

adequate RAM
an open PCI/PCIe expansion slot
an available PATA/SATA connection
BIOS version
the heat that is generated and air flow requirements

CCNA Routing and SwitchingSwitched Networks

Scaling Networks (Version 5.0)

Scaling Networks (Version 5.0) – ScaN Pretest Exam

CCNA Routing and SwitchingRouting Protocols

Routing Protocols OSPF Practice Skills Assessment – Packet Tracer

CCNA 4 Exam 2014CCNA 4 Routing and Switching: Connecting Networks (v.5.0) Exams 2014

CCNA 3 Routing and Switching: Scaling Networks (v.5.0) Exams 2014

CCNA 2 Routing and Switching: Routing and Switching Essentials (v.5.0) Exams 2014

1 Refer to the exhibit.

The network administrator enters these commands into the R1 router:

Introduction to Networks

CCNA 1 Routing and Switching: Introduction to Networks (v.5.0) Exams 2014

IT Essentials v5 answers (ITE 2013-2014)

CCNA v5

Posts by category

Posts

Categories

Follow in Twitter

CCNA Routing and Switching
Switched Networks

CCNA Routing and Switching
Routing Protocols

CCNA 4 Exam 2014
CCNA 4 Routing and Switching: Connecting Networks (v.5.0) Exams 2014