Packet Tracer 5.3.1 Free Downloads Available
Packet Tracer Version 5.3.1 Software Downloads
Packet Tracer version 5.3.1 is a maintenance release that fixes functional and technical issues in previous versions. It replaces Packet Tracer version 5.3
Packet Tracer 5.3.1 supports activities authored in Packet Tracer 4.0, 4.1, 4.11, 5.0, 5.1, 5.2.x and 5.3. Please note that the last two courses of the CCNA Discovery and CCNA Exploration curricula require Packet Tracer version 4.11 at a minimum, CCNA Security requires version 5.2 at a minimum, and the beta Packet Tracer Skills Based Assessments require version 5.2.1 at a minimum. The curricula are fully compatible with Packet Tracer 5.3.1
CCNA3 FINAL - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0)
Take Assessment - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0)
November 02, 2010
1
Refer to the exhibit. An administrator documented the output of a CAM table from an Ethernet switch as shown. What action will the switch take when it receives the frame shown at the bottom of the exhibit?
2
Refer to the exhibit. An administrator issues the commands as shown on SwitchB. What is the result for port Fa0/22?
READ MORE » CCNA3 FINAL - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0)
November 02, 2010
1
Refer to the exhibit. An administrator documented the output of a CAM table from an Ethernet switch as shown. What action will the switch take when it receives the frame shown at the bottom of the exhibit?
discard the frame
forward the frame out port 2
forward the frame out port 3
forward the frame out all ports
forward the frame out all ports except port 3
add station 00-00-3D-1F-11-05 to port 2 in the forwarding table
2
Refer to the exhibit. An administrator issues the commands as shown on SwitchB. What is the result for port Fa0/22?
CCNA Dicovery Working at a Small-to-Medium Business or ISP (Version 4.1)
DsmbISP Final Exam - CCNA Dicovery Working at a Small-to-Medium Business or ISP (Version 4.1)
Thanks Macintosh Brasil
TestInside ccna 640-802 21.24 436 q/a
TestInside cisco ccna 640-802 21.24 436 q/a
How to Open Exam Engine:
1. Double click “TestEngine” exe file to open the Main window.
2. Now click “640-802″ in the left hand pane under “Demo Question Library”
3. Click “Start” button in right hand pane under 640-802 tab. (See screenshots named ‘Ti-Open’ for better understanding)
READ MORE » TestInside ccna 640-802 21.24 436 q/a
How to Open Exam Engine:
1. Double click “TestEngine” exe file to open the Main window.
2. Now click “640-802″ in the left hand pane under “Demo Question Library”
3. Click “Start” button in right hand pane under 640-802 tab. (See screenshots named ‘Ti-Open’ for better understanding)
CCNA4 Final Spanish version
Download comming soon
CCNA1 Final 98% 52 questions and answers
Download comming soon
Other versions
CCNA1 FINAL
- CCNA1 Practice Final H(98%)
- CCNA1 Final Exam version 4.0 (100/100) - (B)
- Cisco CCNA1 Final oct 2009 100 percents
- CCNA1 Final v2
- CCNA4 Skill (Full Questions and answers) + CCNA 1-2-3-4 FINAL (Lastest)
- CCNA1 Final – v1(Lastest in Jun 2009)
- CCNA1 Final latest version ~100/100
- CCNA1 Final v1(Lastest in Jun 2009)
- CCNA1 Final (Lastest in Jun 2009)
- CCNA 1 - Exam 640 - 802 (Only 85%)
- CCNA1 FINAL (New1)
- CCNA1 FINAL (New2)
- CCNA1 FINAL 100%
- CCNA1 FINAL 100% (Updated Jan 14 - 2009)
- Cisco CCNA1 Final test version 4.0 (91%)
- CCNA Exploration 1 - FINAL Exam Answers Version 4.0
- CCNA1 Final
answer ccna1 skill
Answer ccna1 v4.0 skill
READ MORE » answer ccna1 skill
(question here CCNA 640 802 Semester 1 Skill)
Thank tai le send it to me
Host IP address: 156.158.129.200
Thank you for donating to my site
Thank you for donating to my site!
Jul 29, 2010 Donation From David Booth Completed $50.00
Jun 21, 2010 Donation From Denise Courtney Completed $10.00May 31, 2010 Donation From Jenni Mellis Completed $8.00
May 17, 2010 Donation From Andrea Comer Completed $2.00
Jan 22, 2010 Donation From Chloe Stannage Completed $5.00
Jan 21, 2010 Donation From Jennifer Tudor Completed $5.00
Dec 20, 2009 Donation From Toriq Albakri Completed $2.00
Nov 5, 2009 Donation From Dung Nguyen Van Completed $10.00
Thanks all,
Your contribution will help keep this site updated!
CCNA1 Final - Networking Fundamentals
CCNA RE-TAKEN SKILL BASED EXAMINATION
Duration : 60 minutes
No documents allowed
Duration : 60 minutes
No documents allowed
Click to picture to view full size
CONFIGURATION REQUIREMENTS (8 marks)1. Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology.
2. In each LAN, configure the first usable host address for the router, the last usable host address for PCs.
3. Do the basic configuration on each router
4. Configure routing on router by using the static routing protocol.
5. Insert the DNS server in LAN 4. Configure this server resolve the name tuoitre.com.vn for this diagram.
CCNA 640 802 Semester 1 Skill
(Thank Tai Le Send it to me)
Answers comming soon
From quocvuong:
From quocvuong:
"I was too busy should not answer the comment, hope you forgive me.
From now on I will try to answer all comments.Please visit my blog regularly to get the latest information "
Host IP address: 156.158.129.200
Subnet mask: 255.255.128.0
1. Net work ID classs: (A,B or C)
2. Major network address:
3. Major broadcast address:
4. Frist major broadcast address:
5. Last major broadcast address:
6. Number of subnet bits:
7. Number of host bist:
8. Subnet addres for the given host IP address:
9. Range of host address for this subnet
10. Broadcast address for this subnet:
11. Total number of useable subnet (minus 2, excluding the network and subnet):
12. Number of valid host IP address per subnet (minus 2, excluding the network and broadcast address):
13. Convert given subnet mask to binary:
14. Convert given host IP addres to binary:
15. Subnet work address with slash (/) mask for th assigned subnet:
16. Cho mạng để chia:
vd: 1 network with 250 host, 1 network 120 host, 3 network with 18 host and 3 WAN links
No. | Subnet address | Address range | Broatcast Address | Network /perfix |
CCNA 640-802 Testinside v17.14(Updated)
CCNA 640-802 Testinside v17.14(Updated)
READ MORE » CCNA 640-802 Testinside v17.14(Updated)
Final CCNA 4 (H)
1. Which encapsulation protocol when deployed on a Cisco router over a serial interface is only compatible with another Cisco router?
PPP
SLIP
xxxHDLC
Frame Relay
2. What is a characteristic feature of a worm?
xxxexploits a known vulnerability
attaches to executable programs
masquerades as a legitmate program
lies dormant until triggered by an event, time, or date
3.An administrator is configuring a dual stack router with IPv6 and IPv4 using RIPng. The administrator receives an error message when trying to enter the IPv4 routes into RIPng. What is the cause of the problem?
When IPv4 and IPv6 are configured on the same interface, all IPv4 addresses are over-written in favor of the newer technology.
Incorrect IPv4 addresses are entered on the router interfaces.
RIPng is incompatible with dual-stack technology.
xxxIPv4 is incompatible with RIPng
READ MORE » Final CCNA 4 (H)
PPP
SLIP
xxxHDLC
Frame Relay
2. What is a characteristic feature of a worm?
xxxexploits a known vulnerability
attaches to executable programs
masquerades as a legitmate program
lies dormant until triggered by an event, time, or date
3.An administrator is configuring a dual stack router with IPv6 and IPv4 using RIPng. The administrator receives an error message when trying to enter the IPv4 routes into RIPng. What is the cause of the problem?
When IPv4 and IPv6 are configured on the same interface, all IPv4 addresses are over-written in favor of the newer technology.
Incorrect IPv4 addresses are entered on the router interfaces.
RIPng is incompatible with dual-stack technology.
xxxIPv4 is incompatible with RIPng
EWAN Final Exam CCNA Exploration: Accessing the WAN (Version 4.0) lastest
EWAN Final Exam CCNA Exploration: Accessing the WAN (Version
4.0)
READ MORE » EWAN Final Exam CCNA Exploration: Accessing the WAN (Version 4.0) lastest
4.0)
CCNA 640-802 Testinside v17.12 - 346 Q's - April 28th, 2010
CCNA 640-802 Testinside v17.12 - 346 Q's - April 28th, 2010
- Important Information regarding Testinside setup !!!
If you install the Testinside setup on Windows Vista or 7 then you'd face a problem.
It has been noticed that an older or some other version pops out even after the installation of new version in windows vista and 7. This problem doesn't appear in windows XP.
READ MORE » CCNA 640-802 Testinside v17.12 - 346 Q's - April 28th, 2010
- Important Information regarding Testinside setup !!!
If you install the Testinside setup on Windows Vista or 7 then you'd face a problem.
It has been noticed that an older or some other version pops out even after the installation of new version in windows vista and 7. This problem doesn't appear in windows XP.
Packet Tracer Version 5.3 Software Downloads
Packet Tracer version 5.3 is a minor release that includes new protocol support and enhanced functionality: It replaces Packet Tracer version 5.2.1.8
Packet Tracer 5.3 supports activities authored in Packet Tracer 4.0, 4.1, 4.11, 5.0, 5.1 and 5.2.x . Please note that the last two courses of the CCNA Discovery and CCNA Exploration curricula require Packet Tracer version 4.11 at a minimum, CCNA Security requires version 5.2 at a minimum, and the beta Packet Tracer Skills Based Assessments require version 5.2.1 at a minimum. The curricula are fully compatible with Packet Tracer 5.3
READ MORE » Packet Tracer Version 5.3 Software Downloads
Packet Tracer 5.3 supports activities authored in Packet Tracer 4.0, 4.1, 4.11, 5.0, 5.1 and 5.2.x . Please note that the last two courses of the CCNA Discovery and CCNA Exploration curricula require Packet Tracer version 4.11 at a minimum, CCNA Security requires version 5.2 at a minimum, and the beta Packet Tracer Skills Based Assessments require version 5.2.1 at a minimum. The curricula are fully compatible with Packet Tracer 5.3
TestInside CCNA 17.11
TestInside CCNA 17.11 direct download
http://www.ebook4all.org/testinside-ccna-17-11/Password: ebook4all.org
Your contribution will help keep this site updated!
Most recent CCNA 2 Final Answers
Thank anon123456 send it to me!
>>Download<<
Updated 28th jun 2010
Refer to the exhibit. A network administrator adds this command to router R1: ip route 192.168.2.0 255.255.255.0 S0/0/0. What is the result of adding this command?
This route is automatically propagated throughout the network.
The traffic for network 172.16.1.0 is forwarded to network 192.168.2.0.
A static route is established.
The traffic for all Class C networks is forwarded to 172.16.1.2.
Pass4sure ccnp until December 2009 full setup (update link)
(update link)
P4S pass4sure ccnp 642-845 ONT 6.79 Full
LinkP4S pass4sure ccnp 642-901 BSCI 6.85 Full
P4S pass4sure ccnp 642-825 ISCW 6.50 Full
P4S pass4sure ccnp 642-812 BCMSN 6.87 Full
P4S pass4sure ccnp 642-892 Composite 6.99 Full
Password: ebook4all.org
CCNA3 V4 March 31of 2010(80.4%) - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0)
Take Assessment - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0)
www.ccna4u.org
www.ccna4u.net
www.ccna4u.info
www.ccna4all.com
www.ebook4all.org
CCNA3 V4 March 31of 2010(80.4%)
Download
1
Refer to the exhibit. Hosts B and C attempt to transmit a frame at the same time, but a collision occurs. Which hosts will receive the collision jamming signal?
all hosts that are shown
only hosts B and C
only hosts A, B, and C
only hosts A, B, C, and D
only hosts A, D, E, and F
only hosts D, E, and F
READ MORE » CCNA3 V4 March 31of 2010(80.4%) - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0)
www.ccna4u.org
www.ccna4u.net
www.ccna4u.info
www.ccna4all.com
www.ebook4all.org
CCNA3 V4 March 31of 2010(80.4%)
Download
1
Refer to the exhibit. Hosts B and C attempt to transmit a frame at the same time, but a collision occurs. Which hosts will receive the collision jamming signal?
all hosts that are shown
only hosts B and C
only hosts A, B, and C
only hosts A, B, C, and D
only hosts A, D, E, and F
only hosts D, E, and F
March 31, 2010 CCNA3 V4Final Exam
Thank Dagnachew Beyene send it to me!
Download: Comming soon!
ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0) (Mar 22 2010)
Assessment System
Take Assessment - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0)
1
Refer to the exhibit. This switch is to be added to the production network. Which two facts about VLANs and VTP operation can be confirmed by this output? (Choose two.)
The network administrator will be able to configure VLANs of local significance on this switch.
VLANs can only be added to the VLAN database on this switch by a VTP advertisement.
All VLANs that are configured on this switch will be sent to all other switches in the same VTP domain.
This switch will drop all VTP advertisements that come from switches that are configured in the same VTP domain.
Adding this switch to the network will cause no disruption in the VTP domain operations if the rest of the switches in the same VTP domain have a higher configuration revision number.
2 Which statement correctly describes the spanning-tree path cost?
It is calculated based on the total number of switches connected in a loop.
It is calculated based on the utilization of all the switches along a given path.
It is calculated based on the bridge priority of the switches along a given path.
It is calculated based on the sum of the port cost value, determined by link speed, for each switch port along a given path.
3 Which method establishes an administrative connection for configuring the Linksys WRT300N wireless access point?
Associate with the access point and then open a HyperTerminal session with the access point.
Physically connect to the access point and then reboot the computer to launch the configuration software.
From a computer in the same IP subnet as the access point, enter the default IP address of the access point in a web browser.
Modify the TCP/IP properties of the computer connected to the access point so that it exists on the same network, and then reboot your computer to establish a connection.
READ MORE » ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0) (Mar 22 2010)
Take Assessment - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0)
(Answers and Picture, i will update later
Thank Kevin Turner Send it to me!
)
1
Refer to the exhibit. This switch is to be added to the production network. Which two facts about VLANs and VTP operation can be confirmed by this output? (Choose two.)
The network administrator will be able to configure VLANs of local significance on this switch.
VLANs can only be added to the VLAN database on this switch by a VTP advertisement.
All VLANs that are configured on this switch will be sent to all other switches in the same VTP domain.
This switch will drop all VTP advertisements that come from switches that are configured in the same VTP domain.
Adding this switch to the network will cause no disruption in the VTP domain operations if the rest of the switches in the same VTP domain have a higher configuration revision number.
2 Which statement correctly describes the spanning-tree path cost?
It is calculated based on the total number of switches connected in a loop.
It is calculated based on the utilization of all the switches along a given path.
It is calculated based on the bridge priority of the switches along a given path.
It is calculated based on the sum of the port cost value, determined by link speed, for each switch port along a given path.
3 Which method establishes an administrative connection for configuring the Linksys WRT300N wireless access point?
Associate with the access point and then open a HyperTerminal session with the access point.
Physically connect to the access point and then reboot the computer to launch the configuration software.
From a computer in the same IP subnet as the access point, enter the default IP address of the access point in a web browser.
Modify the TCP/IP properties of the computer connected to the access point so that it exists on the same network, and then reboot your computer to establish a connection.
CCNA3 Final March 22 2010 - CCNA 3 Final Exploration 4.0
Click to picture to view full size
I'm checking...!Thanks Kevin Turner Send it to me!
CCNA2 Final Mar 2010: CCNA Cisco Routing Protocols and Concepts Final Exam Practice
CCNA2 Final Mar 2010:
CCNA Cisco Routing Protocols and Concepts Final Exam Practice
www.ccna4u.org
www.ccna4u.net
www.ccna4u.info
www.cisco-exam.info
www.ccna4all.com
1. What are two functions of a router? (Choose two.)
It determines the best path to send packets.
It manages the VLAN database.
It increases the size of the broadcast domain
2. When a router boots, what is the default order to locate the Cisco IOS if there is no boot system command?
ROM, TFTP server, flash
NVRAM, TFTP server, flash
3. Which router component is used to store the routing table?
Flash
NVRAM
ROM
4. Refer to the exhibit. How many routes are child routes?
1
3
READ MORE » CCNA2 Final Mar 2010: CCNA Cisco Routing Protocols and Concepts Final Exam Practice
CCNA Cisco Routing Protocols and Concepts Final Exam Practice
www.ccna4u.org
www.ccna4u.net
www.ccna4u.info
www.cisco-exam.info
www.ccna4all.com
1. What are two functions of a router? (Choose two.)
It connects multiple IP networks.
It controls the flow of data via the use of Layer 2 addresses. It determines the best path to send packets.
It manages the VLAN database.
It increases the size of the broadcast domain
2. When a router boots, what is the default order to locate the Cisco IOS if there is no boot system command?
ROM, TFTP server, flash
flash, TFTP server, ROM
flash, NVRAM, TFTP server NVRAM, TFTP server, flash
3. Which router component is used to store the routing table?
Flash
NVRAM
ROM
SDRAM
4. Refer to the exhibit. How many routes are child routes?
1
3
4
6CCNA3 Final - 04 March 2010
www.ccna4u.org
CCNA3 Final - 04 March 2010
(Thanks dip see)
Welcome and get lastest CCNA Exploration 4.0 Questions and answers
Email: quocvuong.it@gmail.com
Website:
www.ccna4u.org
www.ccna4u.net
www.ccna4u.info
1
Which value determines if a switch becomes the central point of reference in the spanning tree topology?
lowest bridge ID
highest revision number
lowest numeric IP address
highest numeric MAC address
2
Refer to the exhibit. What is the purpose of the configuration commands that are shown?
to activate port Fa0/10
to make the port a member of VLAN 30
to activate port security on port Fa0/10
to add VLAN 30 to the trunk that is connected to port Fa0/10
3
Refer to the exhibit. What would happen if the network administrator moved the network cable of Host A from interface Fa0/1 to Fa0/switch SW1?
Host A remains a member of VLAN 10, because the router is routing traffic between VLANs.
Host A is no longer a member of VLAN 10, because port Fa0/3 has been manually assigned to VLAN 30.
Host A remains a member of VLAN 10, because the switch provides dynamic VLAN assignment for the port.
Host A maintains connectivity to all members of VLAN 10, because it is connected to the same physical network.
Host A is no longer a member of VLAN 10, but because port Fa0/3 was unused, it is now a member of VLAN 1.
READ MORE » CCNA3 Final - 04 March 2010
CCNA3 Final - 04 March 2010
(Thanks dip see)
Welcome and get lastest CCNA Exploration 4.0 Questions and answers
Email: quocvuong.it@gmail.com
Website:
www.ccna4u.org
www.ccna4u.net
www.ccna4u.info
1
Which value determines if a switch becomes the central point of reference in the spanning tree topology?
lowest bridge ID
highest revision number
lowest numeric IP address
highest numeric MAC address
2
Refer to the exhibit. What is the purpose of the configuration commands that are shown?
to activate port Fa0/10
to make the port a member of VLAN 30
to activate port security on port Fa0/10
to add VLAN 30 to the trunk that is connected to port Fa0/10
Refer to the exhibit. What would happen if the network administrator moved the network cable of Host A from interface Fa0/1 to Fa0/switch SW1?
Host A remains a member of VLAN 10, because the router is routing traffic between VLANs.
Host A is no longer a member of VLAN 10, because port Fa0/3 has been manually assigned to VLAN 30.
Host A remains a member of VLAN 10, because the switch provides dynamic VLAN assignment for the port.
Host A maintains connectivity to all members of VLAN 10, because it is connected to the same physical network.
Host A is no longer a member of VLAN 10, but because port Fa0/3 was unused, it is now a member of VLAN 1.
CCNA3 Final 4 march 2010
Download: I'm Checking and upload soon!Thanks dip see
CCNA Exploration 1 – Module 10 Exam Answers
2. Which three statements are true about the role of routers in the network? (Choose three.)
- connecting a PC to a router’s console port
- connecting two routers together via their fast ethernet ports
- connecting two switches together at gigabit speeds
- connecting a PC to a switch at Gigabit Ethernet speeds
- connecting two devices with the same interface type at Fast Ethernet speeds
3. Refer to the exhibit. A network administrator has decided to use packet capture software to evaluate all traffic from the student subnet on the way to the Internet. To ensure that all packets are captured, what network device should be used to connect the monitoring station to the network between R1 and R2?
- They propagate broadcasts.
- They enlarge collision domains.
- They segment broadcast domains.
- They interconnect different network technologies.
- Each router interface requires a separate network or subnet.
- They maintain a common frame format between LAN and WAN interfaces.
- router
- hub
- switch
- wireless access point
4. A network administrator is required to use media in the network that can run up to 100 meters in cable length without using repeaters. The chosen media must be inexpensive and easily installed. The installation will be in a pre-existing building with limited cabling space. Which type of media would best meet these requirements?
5. Refer to the exhibit. Which three statements are true about the exhibited topology? (Choose three.)
- STP
- UTP
- coaxial
- single-mode fiber
- multimode fiber
6. Which three types of connectors are commonly associated with Cisco’s V.35 serial cables? (Choose three.)
- Hosts B and C are in the same subnet.
- Five broadcast domains are present.
- Host B is using a crossover cable to connect to the router.
- Four broadcast domains are present.
- Five networks are shown.
- Host B is using a rollover cable to connect to the router.
7. How many host addresses may be assigned on each subnetwork when using the 130.68.0.0 network address with a subnet mask of 255.255.248.0?
- RJ 11
- DB 60
- Winchester 15 pin
- DB 9
- smart serial
- RJ 45
8. Refer to the exhibit. Based on the IP configuration shown, what would be the result of Host A and Host B attempting to communicate outside the network segment?
- 30
- 256
- 2046
- 2048
- 4094
- 4096
9. Refer to the exhibit. What destination IP address will PC1 place in the header for a packet destined for PC2?
- both host A and B would be successful
- host A would be successful, host B would fail
- host B would be successful, host A would fail
- both Host A and B would fail
10. Refer to the exhibit. Which three statements identify the type of cabling that would be used in the segments that are shown? (Choose three.)
- 192.168.1.1
- 192.168.2.1
- 192.168.2.2
- 192.168.3.1
- 192.168.3.54
11. A company is planning to subnet its network for a maximum of 27 hosts. Which subnet mask would provide the needed hosts and leave the fewest unused addresses in each subnet?
- Segment 1 uses backbone cabling.
- Segment 1 uses a patch cable.
- Segment 3 uses patch cabling.
- Segment 3 uses vertical cabling.
- Segment 3 uses horizontal cabling.
- Segment 4 uses vertical cabling.
12. Refer to the exhibit. A student is setting up a home network primarily used for extensive file transfers, streaming video, and gaming. Which network device is best suited to these types of activities in the topology shown?
- 255.255.255.0
- 255.255.255.192
- 255.255.255.224
- 255.255.255.240
- 255.255.255.248
13. Refer to the exhibit. How many subnets are required to support the network that is shown?
- wireless access point
- router
- hub
- switch
14. What does the term “attenuation” mean in data communication?
- 2
- 3
- 4
- 5
15. To establish a console connection from a computer to a Cisco router, which cable wiring option would be used?
- loss of signal strength as distance increases
- time for a signal to reach its destination
- leakage of signals from one cable pair to another
- strengthening of a signal by a networking device
16. What makes fiber preferable to copper cabling for interconnecting buildings? (Choose three.)
- crossover cable
- straight through cable
- rollover cable
- V.35 cable
17. Refer to the exhibit. A network technician has been allocated the 192.168.1.0/24 private IP address range for use in the network that shown in the exhibit. Which subnet mask would be used to meet the host requirements for segment A of this internetwork?
- greater distances per cable run
- lower installation cost
- limited susceptibility to EMI/RFI
- durable connections
- greater bandwidth potential
- easily terminated
18. Which subnet mask would be assigned to the network address of 192.168.32.0 to provide 254 useable host addresses per subnetwork?
- 255.255.255.128
- 255.255.255.192
- 255.255.255.224
- 255.255.255.240
- 255.255.255.248
19. What type of network cable is used between a terminal and a console port?
- 255.255.0.0
- 255.255.255.0
- 255.255.254.0
- 255.255.248.0
20. Which option identifies the primary interface which would be used for initial configuration of a Cisco router?
- cross-over
- straight-through
- roll-over
- patch cable
21. What are three common methods for setting a UTP Ethernet port to MDI or MDIX operation? (Choose three.)
- AUX interface
- Ethernet interface
- serial interface
- console interface
22. Which device is used to create or divide broadcast domains?
- direct configuration of the device
- cable color code association
- cable selection and configuration
- use of cable testers to determine pinouts
- the enabling of the mechanism to electrically swap the transmit and receive pairs
- the automatic detection and negotiating of MDI/MDIX operation of the port
23. Refer to the exhibit. Assume that all devices are using default settings. How many subnets are required to address the topology that is shown?
- hub
- switch
- bridge
- router
- repeater
- 1
- 3
- 4
- 5
- 7
Latest pass4sure ccna update 5-jan-2010 - Direct Latest TestInside CCNA 640 802 11.72
60 Q/a from latest pass4sure ccna update 5-jan-2010
Link Download
Direct download Latest TestInside CCNA version 11.72 include App and PDF format
Link Download
New SiteLink in CCNA4U Blog
Google PR =2/10
Alexa rank 370,210
Pageviews 20,000/day
Configure A Router With Packet Tracer
Computer networking professionals getting started with Packet Tracer may find the interface to be flustered. Being a development program, this is only natural. However, learning how to configure a router with Packet Tracer will put professionals on the right track to mastering the program in about half an hour.
By this time, you should already have the Packet Tracer download and have it installed on your computer. Open the program and select the router from the lower left-hand corner, and drag it into the center of the sandbox screen as seen below. (Click for larger picture)
READ MORE » Configure A Router With Packet Tracer
By this time, you should already have the Packet Tracer download and have it installed on your computer. Open the program and select the router from the lower left-hand corner, and drag it into the center of the sandbox screen as seen below. (Click for larger picture)
Download Packet Tracer 5 For Free
Packet Tracer 5 is a software suite used to train computer-networking students for CCNA certification. Its primary aim is towards students that don’t have constant access to a Cisco network of devices. It comes standard with tutorials, help topics, and troubleshooting tips that are present in every layer of the OSI model.
Packet Tracer 5 has gained its reputation as succeeding where other technology software suites have failed. Whereas one may argue that it’s impossible to teach “hands on” experience through reading and using programs, Packet Tracer 5 throws a few curve balls at students. If you notice that you can’t receive data over the network you’ve just created, you might have to check that you turned the router on first- just as you would when dealing with a real network!
READ MORE » Download Packet Tracer 5 For Free
Packet Tracer 5 has gained its reputation as succeeding where other technology software suites have failed. Whereas one may argue that it’s impossible to teach “hands on” experience through reading and using programs, Packet Tracer 5 throws a few curve balls at students. If you notice that you can’t receive data over the network you’ve just created, you might have to check that you turned the router on first- just as you would when dealing with a real network!
CCNA Exploration 1 – Module 8 Exam Answers
1. Which type of cable run is most often associated with fiber-optic cable?
2. In most business LANs, which connector is used with twisted-pair networking cable?
- backbone cable
- horizontal cable
- patch cable
- work area cable
- BNC
- RJ-11
- RJ-45
- Type F
CCNA Exploration 1 – Module 9 Exam Answers
1. In the graphic, Host A has reached 50% completion in sending a 1 KB Ethernet frame to Host D when Host B wishes to transmit its own frame to Host C. What must Host B do?
- Host B can transmit immediately since it is connected on its own cable segment.
- Host B must wait to receive a CSMA transmission from the hub, to signal its turn.
- Host B must send a request signal to Host A by transmitting an interframe gap.
- Host B must wait until it is certain that Host A has completed sending its frame.
CCNA Exploration 1 – Module 11 Exam Answers
1. Refer to the exhibit. What command will place the router into the correct mode to configure an appropriate interface to connect to a LAN?
2. In a Cisco router, when do changes made to the running-configuration take effect?
- UBAMA# configure terminal
- UBAMA(config)# line vty 0 4
- UBAMA(config)# line console 0
- UBAMA(config)# interface Serial 0/0/0
- UBAMA(config)# interface FastEthernet 0/1
- after a system restart
- as the commands are entered
- when logging off the system
- when the configuration is saved to the startup-configuration
CCNA Exploration 1 – Module 11 Exam Answers
2. Which three statements are true about the role of routers in the network? (Choose three.)
- connecting a PC to a router’s console port
- connecting two routers together via their fast ethernet ports
- connecting two switches together at gigabit speeds
- connecting a PC to a switch at Gigabit Ethernet speeds
- connecting two devices with the same interface type at Fast Ethernet speeds
- They propagate broadcasts.
- They enlarge collision domains.
- They segment broadcast domains.
- They interconnect different network technologies.
- Each router interface requires a separate network or subnet.
- They maintain a common frame format between LAN and WAN interfaces.
Subscribe to:
Posts (Atom)