Cisco Exploration CCNA 4.0-CCNA 640-802 Blog. Questions & Answers

Showing posts with label CCNA 200 120. Show all posts

CCNA VTP SIM Question

Question

This task requires you to use the CLI of Sw-AC3 to answer five multiple-choice questions. This does not require any configuration.

To answer the multiple-choice questions, click on the numbered boxes in the right panel.

ccna_vtp_sim_question

There are five multiple-choice questions with this task. Be sure to answer all five questions before leaving this item.

CCNA Access List Sim 2

Question

A network associate is adding security to the configuration of the Corp1 router. The user on host C should be able to use a web browser to access financial information from the Finance Web Server. No other hosts from the LAN nor the Core should be able to use a web browser to access this server. Since there are multiple resources for the corporation at this location including other resources on the Finance Web Server, all other traffic should be allowed.

The task is to create and apply a numbered access-list with no more than three statements that will allow ONLY host C web access to the Finance Web Server. No other hosts will have web access to the Finance Web Server. All other traffic is permitted.
Access to the router CLI can be gained by clicking on the appropriate host.

CCNA Access List Sim

Question

accesslist_sim

An administrator is trying to ping and telnet from Switch to Router with the results shown below:

CCNA NAT SIM Question 2

CCNA NAT SIM Question 2

Question

ccna_nat_sim_lab_3


You work as a network technician at 9tut.com. Study the exhibit carefully. You are required to perform configurations to enable Internet access. The Router ISP has given you six public IP addresses in the 198.18.32.65 198.18.32.70/29 range. 9tut.com has 62 clients that needs to have simultaneous internet access. These local hosts use private IP addresses in the 192.168.6.65 – 192.168.6.126/26 range. You need to configure Router1 using the PC1 console. You have already made basic router configuration. You have also configured the appropriate NAT interfaces; NAT inside and NAT outside respectively. Now you are required to finish the configuration of Router1.

Solution

Practice Real CCNA Labs with Packet Tracer Simulator

Practice Real CCNA Labs with Packet Tracer Simulator

Well, the title said it all. Here are some screenshots about the labs in Packet Tracer Simulator:

CCNA Drag And Drop SIM:

packet_tracer_CCNA_lab1

CCNA EIGRP SIM:

packet_tracer_CCNA_lab2

Configuration SIM:

CCNA Implementation SIM

CCNA Implementation SIM

This topology contains 3 routers and 1 switch. Complete the topology.

Drag the appropriate device icons to the labeled Device
Drag the appropriate connections to the locations labeled Connections.
Drag the appropriate IP addresses to the locations labeled IP address

(Hint: use the given host addresses and Main router information)
To remove a device or connection, drag it away from the topology.

Use information gathered from the Main router to complete the configuration of any additional routers. No passwords are required to access the Main router. The config terminal command has been disabled for the HQ router. The router does not require any configuration.

Configure each additional router with the following:

Configure the interfaces with the correct IP address and enable the interfaces.
Set the password to allow console access to consolepw
Set the password to allow telnet access to telnetpw
Set the password to allow privilege mode access to privpw

CCNA EIGRP LAB Question

Question

After adding R3 router, no routing updates are being exchanged between R3 and the new location. All other inter connectivity and Internet access for the existing locations of the company are working properly.

The task is to identify the fault(s) and correct the router configuration to provide full connectivity between the routers.

Access to the router CLI can be gained by clicking on the appropriate host. All passwords on all routers are cisco.

IP addresses are listed in the chart below.

CCNA Drag and Drop SIM Question

Question

You have been hired by Specialty Hardware Incorporated to document the layout of the network. Complete the following tasks: Complete the network topology shown in the graphic by dragging the labels below with the appropriate router types, interface types, and IP addresses to the graphic . Find the information you need by using the router console attached to the R-CENTER router.

ccna_configuration_topology

ccna_configuration_topology_2

Answer and explanation

CCNA Configuration SIM Question

Question:

To configure the router (R2-RC) click on the console host icon that is connected to a router by a serial console cable (shown in the diagram as a dashed black line)

ccna__configuration_sim_lab_4

CCNA NAT SIM Question 1

Question

A network associate is configuring a router for the CCNA Training company to provide internet access. The ISP has provided the company six public IP addresses of 198.18.184.105 198.18.184.110. The company has 14 hosts that need to access the internet simultaneously. The hosts in the CCNA Training company LAN have been assigned private space addresses in the range of 192.168.100.17 – 192.168.100.30.

The task is to complete the NAT configuration using all IP addresses assigned by the ISP to provide Internet access for the hosts in the Weaver LAN. Functionality can be tested by clicking on the host provided for testing.

New CCNA – HSRP VRRP GLBP

New CCNA – HSRP VRRP GLBP

Note: If you are not sure about HSRP and GLBP, please read our HSRP tutorial and GLBP tutorial.

Question 1

Which one of these is a valid HSRP Virtual Mac Address?

A. 0000.0C07.AC01
B. 0000.5E00.0110
C. 0007.B400.1203
D. 0000.C007.0201

READ MORE » New CCNA – HSRP VRRP GLBP

New CCNA – SNMP Questions

New CCNA – SNMP Questions

Note: If you are not sure about SNMP, please read our SNMP tutorial.

Question 1

Which three are the components of SNMP? (Choose three)

A. MIB
B. SNMP Manager
C. SysLog Server
D. SNMP Agent

READ MORE » New CCNA – SNMP Questions

New CCNA – NetFlow Questions

Question 1

What are the benefit of using Netflow? (Choose three)

A. Network, Application & User Monitoring
B. Network Planning
C. Security Analysis
D. Accounting/Billing

New CCNA – Syslog Questions

New CCNA – Syslog Questions

If you are not sure about Syslog, please read our Syslog tutorial.

Question 1

What are the popular destinations for Syslog messages to be saved?

A. Flash
B. The logging buffer RAM
C. The console terminal
D. Other terminals
E. Syslog server

READ MORE » New CCNA – Syslog Questions

New CCNA – New Questions 2

New CCNA – New Questions 2

Note: If you are not sure about EtherChannel, please read my EtherChannel tutorial.

Question 1

etherchannel issue. If you can look very carefully, there is speed mismatched to cause that problem. I selected “speed mismatch”

READ MORE » New CCNA – New Questions 2

New CCNA – Basic Questions

Question 1

What is the first 24 bits in a MAC address called?

A. NIC
B. BIA
C. OUI
D. VAI

READ MORE » New CCNA – Basic Questions

New CCNA – OSI & TCP/IP Model

New CCNA – OSI & TCP/IP Model

Note: If you are not sure about OSI Model, please read our OSI Model tutorial.

Question 1

Where does routing occur within the DoD TCP/IP reference model?

A. application
B. internet
C. network
D. transport

New CCNA – IOS Questions

New CCNA – IOS Questions

Note: If you are not sure about Cisco IOS, please read our Cisco Router Boot Sequence Tutorial and Cisco Command Line Interface CLI.

Question 1

Which command encrypts all plaintext passwords?

A. Router# service password-encryption
B. Router(config)# password-encryption
C. Router(config)# service password-encryption
D. Router# password-encryption